Jon, Visiting your Guitarmaking Blogspot weblog was a real treat. Thanks for putting up the photolog of your work. Any luthier would feel right at home.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Stew-Mac fret slotting saw revisited http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4517 |
Page 1 of 1 |
| Author: | Daniel M [ Fri Jan 13, 2006 4:47 pm ] |
| Post subject: | |
Adding to the previous thread about SM's fret slotting circular saw blade. Erick at SM & I exchanged a several e-mails regarding the problems a few of us were having with our blades cutting too narrow a slot. SM is replacing my old blade no problems. They even gave me a credit for the return postage. Great service. According to Erick, the blade has been re-designed & I will be getting one of the new ones. It should be here in a few days... I'll try it out as soon as possible & keep you folks posted. If you are unhappy with your old blade, talk to Erick. If it's not ages old, he will probably replace it, free of charge. |
|
| Author: | letseatpaste [ Fri Jan 13, 2006 11:09 pm ] |
| Post subject: | |
Great, I had received mine about a week or two before that thread started, I never took it out of the packaging. I'll check with them about replacing it. Thanks for the update. |
|
| Author: | Dickey [ Fri Jan 13, 2006 11:40 pm ] |
| Post subject: | |
Jon, Visiting your Guitarmaking Blogspot weblog was a real treat. Thanks for putting up the photolog of your work. Any luthier would feel right at home.
|
|
| Author: | letseatpaste [ Fri Jan 13, 2006 11:49 pm ] |
| Post subject: | |
Ha ha, thanks. That's my new back-to-sides gluing jig. I built it from masking tape, two clamps, and a towel. It's a refined version of my original jig, which was built only from masking tape. |
|
| Author: | RCoates [ Sat Jan 14, 2006 7:09 am ] |
| Post subject: | |
Yep great blog. Very nice work. |
|
| Author: | ATaylor [ Sat Jan 14, 2006 9:46 am ] |
| Post subject: | |
I thought Arkansans used duct-tape exclusively?! 
(I have license to cap on Arkansas having been born and raised in Little Rock) |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|